Standard Features


The world's favorite multi-purpose sled gets a serious redo.


Model Year
RS Viking Professional
Starting at MSRP


128.7 in.
54.3 in.
47.2 in.

Engine & Drivetrain

4-stroke, 3-cylinder, 3-valves, liquid-cooled
973 cc
Bore x Stroke
79 x 66.2 mm
3 x 40 mm
Digital T.C.I. w/ throttle position sensor
Fuel Type
Regular unleaded
Fuel Tank Capacity
10.6 gal.
Oil Capacity
3 qt.
Dry sump
Variable ratio, H/L/R
Front: Independent, double wishbone; hydraulic, gas cell shocks; 6.3 in. travel
Rear: ProComfort® w/ articulated rails; C40 HPG shocks; 13.4 in. travel
2-valves, rear
4-piston hydraulic w/ lightweight ventilated disc


All plastic SUV wide ski; carbide ski runners
Ski Stance
38.4 in.
Track LxWxH
154 x 20 x 1.375 in. Camoplast® Rip Saw™


Dark Green Metallic

Standard Features

 3-Cylinder Mid Performance 4-Stroke Engine
The dependable, durable and fuel efficient Mid Performance engine has been the foundation of snowmobiling’s 4-stroke revolution. The carbureted classic engine’s 3-cylinder design is silky smooth and very trail-friendly.
 Direct-To-Crankshaft Clutching
Instead of using a gear reduction, the Mid Performance engine has the primary clutch directly attached to the crankshaft. It allows the engine to be mounted deeper in the chassis to deliver a lower center of gravity, further improving the sled’s cornering stability. The YVXC primary spins at 8500 RPM to transfer power from the engine to the secondary and on to the track.
 NEW! 20 x 156 x 1.25-Inch Camoplast® Rip Saw™ Track
The RS Viking Professional boasts a new 20x156-inch Camoplast® Rip Saw™ track with 1.375-inch lugs. The deeper lug height delivers improved deep snow acceleration and handling for off-trail usage. The VK Pro’s extra-large version of the Rip Saw™ gives it excellent flotation in fresh snow. Its open-window design accepts the new extrovert drivers.
 Dual-Range Hi/Lo And Reverse Transmission
The RS Viking Professional has a dual-range transmission, allowing owners to operate the sled in low range for towing heavy loads below 50 MPH or in high range when not towing. The transmission is engaged via a lever on the right-hand side of the cab. The transmission lever also activates the reverse gear.
 Lightweight Forged Pistons
The forged pistons used in the Mid Performance engine are engineered for light weight and still allow high compression rates of 11.3:1 on 87 Octane gas.
 NEW! Wide Blow Molded Plastic Skis
The RS Viking Professional’s new super-wide plastic skis give it excellent flotation over fresh snow, while also giving it good trail cornering ability.
 Ultra-Rigid Deltabox™ Chassis
The Deltabox chassis is designed specifically to house the Mid Performance engine. It supports the engine and utilizes it in forming one of the most rigid chassis on the market. The more rigid the chassis, the more consistent the sled will handle.
 Second Generation Front Suspension Geometry
The geometry of the second generation front suspension features short spindles and long, curved A-arms. The suspension was engineered to deliver excellent cornering stability and consistent turning effort throughout its travel stroke. It delivers 9 inches of vertical travel and sets the skis at 42.7 inches. Steering is consistent, because the spindle caster is maintained at a constant 23 degrees. The curved A-arms help avoid under-snow obstacles.
 CF Die Cast Construction
Yamaha’s Controlled Flow casting technique is used for many of the structural pieces on the chassis. The CF process draws the molten metal into the mold under a vacuum, reducing the formation of air bubbles in the material. As a result, pieces can be made much thinner and still deliver the strength characteristics of a conventionally-cast, thicker piece.
 Traditional Handlebars With Center Grab Strap
The RS Viking Professional has a traditional-style handlebar with a center grab strap. This setup helps users to maneuver through fresh snow or tight spaces.
 NEW! Dual Shock Rear Suspension
The RS Viking Professional has a completely new rear suspension, moving away from the ProAction skid in favor of a dual shock torsion spring design. A new 40mm rear shock package is comfort calibrated with an emphasis on anti-bottoming. The larger diameter allows for greater fade resistance under load as well. In fact, the whole suspension system underwent a recalibration, right down to the spring rate on the rear rail flip up mechanism. The new articulation setup delivers improved soft snow reverse performance, allowing you to back up off trail with greater confidence that you won't dig in.
 Cavernous Under-Seat Storage
The seat on the RS Viking Professional flips up to open a large storage area beneath it. The space has a tool kit integrated into it. Consumers can carry extra spare parts, a full collection of tools, and even lunch under the seat.
 NEW! Tubular Cargo Rack
The RS Viking Professional has a new tube-construction cargo rack. The simple design is lighter than previous without sacrificing any capacity.
 Tow Hitch
The RS Viking Professional has a tow hitch mount on the rear of the sled. Consumers can tow a trailer sled for more cargo capacity.
 Extra Tall Windshield
The RS Viking Professional is all about getting the job done, no matter what, so the windshield is very large to protect both driver and passenger from the elements.
 Digitally Controlled Hand And Thumb Warmers
The RS Viking Professional’s hand and thumb warmers have been consistently rated among the best in the industry. They are individually controlled, with the settings shown on the digital gauge so that riders can see them. Owners can choose from 10 settings on the grips and 10 settings on the thumb warmers, as opposed to the hi/lo settings of most other sleds on the market. The passenger hand grip warmers have a separate on/off switch.
 New Graphics Package
The RS Viking Professional comes in one new graphics package: metallic forest green with black painted tunnel and suspension components. This awesome design produces one of the best looking sleds on the snow.


Dark Green Metallic
*NOT ALL NEW UNITS PICTURED ARE IN STOCK TODAY. All models are subject to prior sale and may from time to time have limited supply from the manufacturer. Please call for availability and best pricing.
Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, $99 dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Policies | Privacy | Terms & Conditions | Disclaimer | Site Map
Facebook Twitter YouTube Blog